UMC (UK) LTD
Contact and Helpline info

 

Firmware upgrade for Technika Televisions

Please select your model of TV. If you need help identifying your model, click here.

32F22B-FHD
(Manufacturer code 32/234Z) Earphone fault
32F22B-FHD
(Manufacturer code 32/234Z) Lines on screen
32F22B-FHD/DVD
(Manufacturer code 32/234Z) Lines on screen
50F22B-FHD
(Manufacturer code 50/234Z)
LCD22-212i
(Manufacturer code W216/73P)
LCD19-230
(Manufacturer code W185/55G)
LCD22-230
(Manufacturer code W216/55G)
LCD19-230I
(Manufacturer code W185/55J)
LCD19-230P2I
(Manufacturer code W185/55J)
LCD22-230I
(Manufacturer code W216/55J)
LCD23-231BBGI
(Manufacturer code X23/50J-BB)
LCD23-231BRGI
(Manufacturer code X23/50J-BG)
LCD19-228
(Manufacturer code X185/54G)
LCD19-220
(Manufacturer code X19/45E)
LCD22-220
(Manufacturer code X22/45E)
LCD32-210 (Manufacturer code X32/69E)


Models - 32F22B-FHD .

Make of TV:

Technika

Model of TV:

32F22B-FHD Manufacturers code (32/234Z)

Reported
Issues:

When the TV has earphones connected sound can be heard through both speakers and headphones.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Setup Screen


Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please right click HERE and select "save target as" to download the file. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. Disconnect the power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket whilst pressing the standby button on the TV.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.


Models - 32F22B-FHD, 32F22B-FHD/DVD and 50F22B-FHD only.


Make of TV:

Technika

Model of TV:

Various – See below

Reported
Issues:

TV shows lines on the screen when the TV is set to a HDMI source and an external HDMI device is connected

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Setup Screen


Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click the link further down this page to download the correct file for your TV and save it to
your USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.


Very important. Only download the file for your particular model of TV.

right click 32F22BFHD and select "save target as

right click 32F22BFHD/DVD (32" model with built in DVD player) and select "save target as

right click 50F22BFHD and select "save target as

3) Go to your TV. Disconnect the power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket and press the standby button on the TV or remote control.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.


Models - LCD22-212i


Make of TV:

Technika

Model of TV:

LCD22-212i Manufacturers code (W216/73P)

Reported Issues:

Youtube App is not connecting to the server

Solution:

Youtube App firmware update is available

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.




Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please right click HERE and select "save target as" to download the firmware update. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. Disconnect the power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket whilst pressing the standby button on the TV.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.


Models - LCD19-230, LCD22-230, LCD19-230I, LCD19-230P2I, LCD22-230I, LCD23-231BBGI, LCD23-231BRGI only.


Make of TV:

Technika

Model of TV:

Various – See below

Reported Issues:

Sometimes First Time Installation screen appears when TV is switched on.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.




Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click the link further down this page to download the correct file for your TV and save it to
your USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.


Very important. Only download the file for your particular model of TV.

LCD19-230 & LCD22-230

LCD19-230I, LCD19-230P2I & LCD22-230I (Republic of Ireland models)


LCD23-231BBGI & LCD23-231BRGI (Republic of Ireland models)


3) Go to your TV. Disconnect the power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket and press the standby button on the TV or remote control.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.


Model - LCD19-228 only.

Make of TV: Technika
Model of TV: LCD19-228 (the manufacturers code is X185/54G)
Comments: This issue affects the White version of this TV only.
Reported Issues: TV loses channels after the TV has been turned off/power disconnected.
Solution: New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Note: You will need a USB Memory stick to download this software and update the TV.

Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please click HERE to download the file. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. Disconnect the power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket and press the standby button on the TV or remote control.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.


Model - LCD19-220 only.

Make of TV: Technika
Model of TV: LCD19-220 (the manufacturers code is X19/45E)
Comments: -
Reported Issues: Text too small on certain menus/EPG, EPG too transparent making it hard to see in dark light conditions, also adds additional information to record list.
Solution: New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Note: You will need a USB Memory stick to download this software and update the TV.

Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please click HERE to download the file. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. With the TV turned on, insert the USB memory key. The TV should auto detect the USB key.
4) If the TV asks you to start any operation, select 'No'. (no is the default)
5) On the remote control, press 'Menu' and scroll down to 'Set-up' & scroll across and down to 'Firmware upgrade' then press OK.
6) After the upgrade has been successful, the TV will re-set.


Model - LCD22-220 only.

Make of TV: Technika
Model of TV: LCD22-220 (the manufacturers code is X22/45E)
Comments: -
Reported Issues: Text too small on certain menus/EPG, EPG too transparent making it hard to see in dark light conditions, also adds additional information to record list.
Solution: New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Note: You will need a USB Memory stick to download this software and update the TV.

Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please click HERE to download the file. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. With the TV turned on, insert the USB memory key. The TV should auto detect the USB key.
4) If the TV asks you to start any operation, select 'No'. (no is the default)
5) On the remote control, press 'Menu' and scroll down to 'Set-up' & scroll across and down to 'Firmware upgrade' then press OK.
6) After the upgrade has been successful, the TV will re-set.


Model - LCD32-210 only.

Make of TV: Technika
Model of TV: LCD32-210 (the manufacturers code is X32/69E)
Comments: -
Reported Issues: Text too small on certain menus/EPG, EPG too transparent making it hard to see in dark light conditions, also adds additional information to record list.
Solution: New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control, press Menu and scroll to the set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

Note: You will need a USB Memory stick to download this software and update the TV.

Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Please click HERE to download the file. Please do not rename the file. Once downloaded, copy it to your USB Memory stick.
3) Go to your TV. With the TV turned on, insert the USB memory key. The TV should auto detect the USB key.
4) If the TV asks you to start any operation, select 'No'. (no is the default)
5) On the remote control, press 'Menu' and scroll down to 'Set-up' & scroll across and down to 'Firmware upgrade' then press OK.
6) After the upgrade has been successful, the TV will re-set.






We accept the following methods of payment: We accept the following methods of payment

Copyright © 2016 UMC (UK) LTD.