UMC (UK) LTD
Contact and Helpline info

 

Firmware upgrade for Blaupunkt Televisions

Please select your model of TV. If you need help identifying your model, click here.

32/148O-GB-11B-EGP-UK

43/137O-WB-11B-FEGU-UK

49/148O-GB-11B-FEGU-UK

32/56G-GB-1B-F3TCU-UK

32/147I-GB-5B-HCDUP-UK




Models 32/148O-GB-11B-EGP-UK



Make of TV:

Blaupunkt

Model of TV:

32/148O-GB-11B-EGP-UK

Comments:

This affects all models with serial numbers starting with BS32E148BHJ0P0K10K

Reported Issues:

TV set will power off and stick in standby when repeatedly pressing the remote or the TV's buttons during start up or use.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control press Menu and scroll to set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

setupmenu


Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.

1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click right click HERE and select "save target/link as" to download the file to your FAT 32 formatted USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.
3) Go to your TV. Disconnect power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV.
5) Re-connect the power at the mains socket.
6) The TV will power on and the light on the front will flash blue whilst updating and a progress bar will be displayed on the TV set. When it has completed, the TV will restart.
7) You will be welcomed with the first time installation screen.
8) Remove the USB stick.
9) Press OK to retune the TV.




Models 43/137O-WB-11B-FEGU-UK



Make of TV:

Blaupunkt

Model of TV:

43/137O-WB-11B-FEGU-UK

Comments:

This affects all models with serial numbers starting with BS43E137BFJ0U0K10L

Reported Issues:

TV set will power off and stick in standby when repeatedly pressing the remote or the TV's buttons during start up or use.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control press Menu and scroll to set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

setupmenu


Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.

1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click right click HERE and select "save target/link as" to download the file to your FAT 32 formatted USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.
3) Go to your TV. Disconnect power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV.
5) Re-connect the power at the mains socket.
6) The TV will power on and the light on the front will flash blue whilst updating and a progress bar will be displayed on the TV set. When it has completed, the TV will restart.
7) You will be welcomed with the first time installation screen.
8) Remove the USB stick.
9) Press OK to retune the TV.




Models 49/148O-GB-11B-FEGU-UK



Make of TV:

Blaupunkt

Model of TV:

49/148O-GB-11B-FEGU-UK

Comments:

This affects all models with serial numbers starting with BS49E148BFJ0U0K10M

Reported Issues:

TV set will power off and stick in standby when repeatedly pressing the remote or the TV's buttons during start up or use.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control press Menu and scroll to set-up menu. If your set up menu does not look like the image below, do not install this firmware update.

setupmenu


Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.

1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Right click HERE and select "save target/link as" to download the file to your FAT 32 formatted USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.
3) Go to your TV. Disconnect power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV.
5) Re-connect the power at the mains socket.
6) The TV will power on and the light on the front will flash blue whilst updating and a progress bar will be displayed on the TV set. When it has completed, the TV will restart.
7) You will be welcomed with the first time installation screen.
8) Remove the USB stick.
9) Press OK to retune the TV.



Models 32/56G-GB-1B-F3TCU-UK



Make of TV:

Blaupunkt

Model of TV:

32/56G-GB-1B-F3TCU-UK

Comments:

This affects all models with serial numbers starting with BW32C56BF3BKUE469.

Reported Issues:

TV randomly powers off.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control press Menu and scroll to set-up menu. If your set up menu does not look like the image below, do not install this firmware update.




Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click HERE to download the file to your USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.
3) Go to your TV. Disconnect power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket and press the standby button on the TV or remote control.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.



Models 32/147I-GB-5B-HCDUP-UK



Make of TV:

Blaupunkt

Model of TV:

32/147I-GB-5B-HCDUP-UK

Comments:

This affects all models with serial numbers starting with BS32K147BHCDPG015

Reported Issues:

When a DVD is present in the DVD drive, the TV constantly switches to DVD mode.

Solution:

New firmware is available to correct this.

The set up menu should look like the image below. To access the menu, on the remote control press Menu and scroll to set-up menu. If your set up menu does not look like the image below, do not install this firmware update.




Note: You will need a USB Memory stick to download this software and update the TV.


Installation instructions.
1) Connect your USB memory stick to your PC and delete any files that are stored on it.
2) Click HERE to download the file to your USB Memory Stick. Do not rename the file & do not put it in a folder on the USB stick.
3) Go to your TV. Disconnect power from the mains socket for 10 seconds (until the standby light has extinguished). Do not power the TV back on until completing step 4.
4) Insert the USB memory stick into the USB port on the rear/side of the TV
5) Re-connect the power at the mains socket and press the standby button on the TV or remote control.
6) The TV will come on and the light on the front will flash blue whilst updating. When it has completed, the light will turn to red.
7) Remove the USB stick and turn the TV on.
8) You will be welcomed with the first time installation screen. If you are not, on the remote control press 'Menu' followed by the number '8' four times. (So Menu, 8-8-8-8)
9) Press OK to retune the TV.