UMC (UK) Limited
Contact and Helpline infoPrivacy Policy

Please note, UMC UK LTD was acquired by Sharp Corporation. During the transition, any transactions or correspondence with us may be from either UMC UK LTD or Sharp Consumer Electronics UK LTD.

 

Sky, Sky+, Sky HD & Universal Remote Control Codes for Blaupunkt Televisions.

If your model is not listed in the table below, please use the following codes.

Sky+HD Rev9F – 2134 (All models except models that include a double sided remote control)

Sky+HD Rev10 – 3390 (All smart models that include a double sided remote control)

The codes listed above will only work in Sky Revision 9F or Sky Revision 10 or later. (They will not work in earlier versions)

If you need help identifying which version of Sky Remote you have or how to programme your sky remote, please click here.

One for All Universal Remote Codes – 1106 or 2106 (for models with DVD Player built in, the code for the DVD section of the remote is 2302)

One for All Universal Remote Code – 3362 (For Smart TV’s that include a double sided remote control)

If you need support with regards to which Universal remote controls are supported, please click here.


 

 

Sky Remote

Universal Remote

Manufacturer Model No.

Screen Size (Inches)

Code

Revision #

Sky Q

Code

All Models that have buttons on both the front and back of the remote control.

All

3390

Rev 10

6687*

3362

All Models that have buttons on only one side remote control (except models listed below)

All

2134

Rev.9F

4170

2106 or 1106 (2302 DVD)

BN24H1131BKB
24
No code available for Sky+/Sky HD
5459*
5431*
BN32H1131BKB
32
5459*
5431*
BN40F1131BKB
40
5459*
5431*
BN43F1131BKB
43
5459*
5431*

* Please note these codes were only created in November 2020. Depending on the model/version of Sky Q or other universal remote, there may be combatablity issues. In these cases, please refer below for the best step available.

Sky Codes
If the Sky code we provide does not work, please check you have the correct version/revision of Sky remote control (or a later version).

If you have a Revision 9F (Non Smart TV’s) or Revision 10 (Smart TV’s that feature double sided remote control) and it will not accept the code, please click here.

Universal Codes
If the universal remote code listed does not work, please contact the manufacturer of the universal remote control for assistance. Often, the code will not work if the remote control was manufactured before the television. We only have codes for One for All branded remote controls, although from experience, many of them use the same codes.

 





We accept the following methods of payment: We accept the following methods of payment

Copyright © 2020 UMC (UK) Limited.